HP LaserJet Pro MFP M426dw

HP LaserJet Pro MFP M426dw

HP LaserJet Pro MFP M426dw - hp.com

HP LaserJet Pro MFP M426dw Ink

The HP LaserJet Pro MFP M426dw is a monochrome laser printer that does not use ink cartridges. Instead, it utilizes a toner cartridge to produce high-quality black and white prints. The toner cartridge contains a fine powder called toner, which is fused onto the paper using heat and pressure during the printing process.

The M426dw uses HP 26A and HP 26X toner cartridges, which are specifically designed for this printer model. The HP 26A cartridge is the standard capacity option, while the HP 26X cartridge is the high-capacity option. The high-capacity cartridge typically offers a higher page yield, allowing you to print more pages before needing to replace it.

When it comes to replacing the toner cartridge, follow these steps:

1. Make sure the printer is turned on.
2. Open the front door of the printer, which provides access to the toner cartridge.
3. Grasp the handle of the toner cartridge and pull it out of the printer.
4. Take the new toner cartridge out of its packaging. Gently shake it from side to side to distribute the toner evenly.
5. Remove the protective sealing tape from the new cartridge.
6. Align the new cartridge with the corresponding slot inside the printer.
7. Slide the toner cartridge into the printer until it is firmly seated.
8. Close the front door of the printer.

Once the new toner cartridge is installed, the printer will detect it and calibrate accordingly. It's a good practice to follow the printer's prompts or instructions displayed on the control panel, if any, to ensure proper installation and usage of the toner cartridge.

Remember that the M426dw uses only black toner, as it is a monochrome printer. It does not require separate ink cartridges for different colors.

Overall, the HP LaserJet Pro MFP M426dw utilizes toner cartridges instead of ink cartridges to deliver high-quality black and white prints efficiently.

Share :